What makes the Mel-8704R-500 Model so uniquely different from all other EMF meters is that in addition to detecting AC/DC EMF fluctuations and Ambient temperature changes, it has a special REM feature. REM stands for Radiating EM Field. When the circuit is activated, an independent discreet EM field is created around a mini telescopic antenna.
This EM field can ONLY be influenced by materials and objects with high electron mobility (many free electrons) in other words conductive properties. Conductivity is determined by the types of atoms in a material. Based on Conductive source, proximity & strength, the EM field can be easily changed causing some field distortion. When this happens, there are (4) colorful LED lights and Sound that will activate. The visual and audible response is proportional and correlates directly to the REM field disturbance. The stronger the influence on the REM field, the more intense the LED's and Sound response. This new feature is immune to Radio Waves, AC/DC EMF and other influences that may lead to a false positive response. For best results, Place the device on a non-conductive surface when conducting your communication sessions. The Mel-REM can also be used as a hand held device, but careful attention should be made to keep hand and fingers toward the bottom of the instrument. This instrument is intended to further help promote and advance Paranormal research.
Introduction
The ATDD is designed specifically to monitor and detect a +5 deg. / -5 deg. ambient temperature (deviation) change that occurs within an environment. When a temperature shift does occur, the device will react quickly and produce a unique, one octave "step" tone for each individual degree change. Incremental "+" changes have a higher pitch while descending "-" temperature drops have a lower pitch. This allows a paranormal investigator to "hear" and validate any temperature change around the device from up to 50' away (line of sight).
This device can also help investigators become more efficient and thorough by helping to monitor remote unattended areas throughout a house or building during an investigation and help direct attention to an area that may have paranormal activity. In addition, the ATDD device utilizes RED LEDs for a "+" temperature change and BLUE LEDs for a "-" change.
A single multi-purpose push button is used to "Tare" the circuit and mute the sound in any of the three configurations.
Directions:
To activate the ATDD circuit, push the button located behind the tilt stand. Once activated, the ATDD will do a quick diagnostic check and the circuit will “Baseline” to the environment ambient temperature conditions.
The Baseline / Set momentary button located on the right side of the Mel allows you to “Tare” or “Baseline” at anytime should there be a natural, gradual temperature change over time. The button also allows you to “Mute” the sound in any or all temperature conditions in order to operate in Silent Mode.
The circuit will also monitor for any gradual changes and automatically “mute” the sound after 10 seconds. The sound will resume when the next 0.1 / - 0.1 degree change occurs.
PRICE INCLUDES 10% GST
